Hose Rack Assembly
The EMACO Hose Rack Assembly is a semi-automatic swing rack that stores folded fire hose and releases water only after the final fold is pulled for controlled deployment.
- Class I, II and III arrangements
- Options: 40 mm and 65 mm equipment
- Automatic water-release mechanism
- Hose, valve and nozzle package
- Cabinet configurations available
Engineering overview
The EMACO Hose Rack Assembly performs one defined job: it serves as a complete hose-station assembly for organized storage and rapid one-person deployment from a standpipe outlet. Movable pins support the folded hose, while the release mechanism keeps water out until the hose is fully deployed. EMACO lists Class I, II and III combinations with angle valve, rack nipple, hose, rack, nozzle and cabinet. Connect the rack nipple and angle valve to the standpipe, allow full swing and withdrawal clearance, and position the nozzle for immediate access. Select the system class and hose diameter from the governing standard, intended users, hydraulic demand and local authority requirement. The order should identify the offered model, applicable approval, materials, rated pressure or capacity, connection arrangement and accessories. Field installation and acceptance testing follow the design documents and selected product data.
Technical Q&A
Which EMACO Hose Rack Assembly configuration suits the design duty?
Start with the hydraulic duty and site constraints. Select the system class and hose diameter from the governing standard, intended users, hydraulic demand and local authority requirement.
Where does the EMACO Hose Rack Assembly connect in the fire-protection system?
Follow the approved layout. Connect the rack nipple and angle valve to the standpipe, allow full swing and withdrawal clearance, and position the nozzle for immediate access.
What must be checked before the EMACO Hose Rack Assembly is ordered?
Compare the offer with the approved submittal before release. Confirm class, component sizes, hose length and approval, cabinet dimensions, thread standard and all included accessories.
Technical specifications
|
Specification
|
Product information
|
|---|---|
|
Models
|
EN0151-C1; EN0151-C2; EN0151-C3
|
|
Size / capacity
|
40 mm (1.5 inch) and 65 mm (2.5 inch) equipment
|
|
Working pressure
|
Confirm against the selected model documentation.
|
|
Connections
|
Class I, Class II and Class III arrangements
|
|
Materials / finish
|
Confirm material and finish for the selected configuration.
|
|
Documented standards
|
Confirm applicable listing for the exact offered model.
|
Resources & documents
Access available datasheets and certificates through the protected resources portal. For model-specific submittals, send your project requirements to our technical team.
Model details
PRODUCT NAME MODEL EN0151-C1 MODEL EN0151-C2 MODEL EN0151-C3 Class I Class II Class III Angle Hose Valve 2.5” (65mm) 1.5” (40mm) 2.5” (65mm) and 1.5” (40mm) Rack Nipple 2.5” (65mm) 1.5” (40mm) 1.5” (40mm) Single Jacket PU Fire Hose 2.5” (65mm) 1.5” (40mm) 1.5” (40mm) Pin Rack 2.5” (65mm) 1.5” (40mm) 1.5” (40mm) Nozzle 2.5” (65mm) 1.5” (40mm) 1.5” (40mm) Hose Cabinet 950mm (H) x 750mm (W) x 300mm (D) 750mm (H) x 750mm (W) x 200mm (D) 950mm (H) x 750mm (W) x 250mm (D)
Related Products
