Hydrant and Hose Accessories
The EMACO Hydrant and Hose Accessories serves as matched connection and storage components that complete hose stations, including pin racks, threaded adapters, rack nipples and fire-hydrant coupling interfaces.
- Hose pin rack model EN0155-R
- Hydrant adapter model EN0156
- Rack nipple model EN0155-N
- NST and BS 336 interfaces
- Options: Steel and brass construction
Engineering overview
In the completed system, EMACO Hydrant and Hose Accessories acts as a group of interface components used to connect, store and deploy hose equipment within hydrant and standpipe stations. Use matched components from the same hose-station design and verify that adapters do not reduce the required waterway or obstruct cabinet operation. EMACO identifies a semi-automatic pin rack, an adapter with female NST and BS 336 instantaneous connections, and a brass rack nipple with male thread interfaces. These parts help align hose-station equipment with the installed piping and coupling standard. Select each accessory by hose diameter, valve outlet, cabinet arrangement, thread standard and the approved rack configuration. Do not approve a substitution on a product name alone. Check the exact model, listing, material, rating, connection and accessories against the submittal, then install and test the equipment to the project standard.
Technical Q&A
What governs selection of the EMACO Hydrant and Hose Accessories for this fire-protection system?
The calculation and installation conditions set the selection. Select each accessory by hose diameter, valve outlet, cabinet arrangement, thread standard and the approved rack configuration.
What installation details matter for the EMACO Hydrant and Hose Accessories?
Keep the operating route and maintenance access clear. Use matched components from the same hose-station design and verify that adapters do not reduce the required waterway or obstruct cabinet operation.
Which order details should be fixed for the EMACO Hydrant and Hose Accessories?
Check the offered configuration line by line against the specification. Confirm model, material, inlet and outlet thread, nominal size, compatibility with the hose rack and whether the item carries a separate approval.
Technical specifications
|
Specification
|
Product information
|
|---|---|
|
Models
|
EN0155-R hose pin rack; EN0156 hydrant adapter; EN0155-N rack nipple
|
|
Size / capacity
|
Confirm against the selected model documentation.
|
|
Working pressure
|
Confirm against the selected model documentation.
|
|
Connections
|
NST and BS 336 interfaces
|
|
Materials / finish
|
Steel and brass construction
|
|
Documented standards
|
Confirm applicable listing for the exact offered model.
|
Resources & documents
Access available datasheets and certificates through the protected resources portal. For model-specific submittals, send your project requirements to our technical team.
Model details
HOSE PIN RACK ADAPTER RACK NIPPLE Model EN0155-R (Standard) Model EN0156 (Standard) Model EN0155-N (Standard) Fire Hose Rack is a semi-automatic pin rack. Pre-loaded with movable pins and an automatic release mechanism that keeps water out of the hose until the last fold is removed. Body Material: Red enameled steel Fire Hydrant Adapter is a connector accessory. It has female NST threads on one side and BS 336 female instantaneous on the other. It is used to connect fire hose to pipe threads in conjunction with the swinging hose rack or with a hose valve for hydrant box. Rack Nipple is a cast brass hex nipple connector accessory. It has male NST threads on one side and male hose thread on the other. It is used to connect fire hose to pipe threads in conjunction with the swinging hose rack.
Related Products
