Breeching Inlet
The EMACO Breeching Inlet serves as a fire-department inlet that allows an external pumping appliance to supplement water to building standpipe or sprinkler systems during an emergency.
- Approval / model options: LPCB and standard
- Two-way 100 mm configuration
- Four-way 150 mm configuration
- BS 336 instantaneous male inlets
- Vertical or horizontal mounting
Engineering overview
EMACO Breeching Inlet is a fire-department connection used to feed pressurized water into a building fire-protection system. The manifold combines multiple instantaneous inlets into one flanged outlet so fire crews can support the standpipe or sprinkler supply. EMACO lists two-way and four-way units manufactured with reference to BS 5041 Part 3. Choose the number of inlets and outlet size from the hydraulic demand, local fire-brigade hose connection and required pumping arrangement. Install at an accessible external location, connect to the correct system riser and provide check valves, signage and drainage as required by the design. The approved submittal must state the exact model, listing or approval, material, pressure or capacity rating, connection and included accessories. Install, commission and test it to the project design, selected datasheet and applicable fire-protection standard.
Technical Q&A
How should the EMACO Breeching Inlet be sized or selected?
Begin with the required flow, pressure, connection and service conditions. Choose the number of inlets and outlet size from the hydraulic demand, local fire-brigade hose connection and required pumping arrangement.
How should the EMACO Breeching Inlet be arranged in the system?
The system arrangement controls this. Install at an accessible external location, connect to the correct system riser and provide check valves, signage and drainage as required by the design.
What should procurement verify for the EMACO Breeching Inlet?
Confirm the technical schedule before placing the order. Confirm approval, two-way or four-way configuration, outlet flange, inlet coupling, mounting orientation and enclosure requirement.
Technical specifications
|
Specification
|
Product information
|
|---|---|
|
Models
|
E0191-202-00; E0191-203-00; EN0191-202-00; EN0191-203-00
|
|
Size / capacity
|
INLET SIZE: 2Way – 4” (100mm); 4Way – 6” (150mm)
|
|
Working pressure
|
Confirm for the selected model.
|
|
Connections
|
INLET SIZE: 2Way – 4” (100mm); 4Way – 6” (150mm); Outlet: Flanged E.BS 10 Table; Inlet: BS 336 Instantaneous Male
|
|
Materials / finish
|
MATERIAL: Body Cast Iron
|
|
Documented standards
|
APPROVAL: LPCB; BS Standard
|
Resources & documents
Access available datasheets and certificates through the protected resources portal. For model-specific submittals, send your project requirements to our technical team.
Model details
MODEL: E0191-202-00 | APPROVAL: LPCB | MATERIAL: Body Cast Iron | INLET SIZE: 2Way – 4” (100mm) | Outlet: Flanged E.BS 10 Table | Inlet: BS 336 Instantaneous Male
MODEL: E0191-203-00 | APPROVAL: LPCB | MATERIAL: Body Cast Iron | INLET SIZE: 4Way – 6” (150mm) | Outlet: Flanged E.BS 10 Table | Inlet: BS 336 Instantaneous Male
MODEL: EN0191-202-00 | APPROVAL: BS Standard | MATERIAL: Body Cast Iron | INLET SIZE: 2Way – 4” (100mm) | Outlet: Flanged E.BS 10 Table | Inlet: BS 336 Instantaneous Male
MODEL: EN0191-203-00 | APPROVAL: BS Standard | MATERIAL: Body Cast Iron | INLET SIZE: 4Way – 6” (150mm) | Outlet: Flanged E.BS 10 Table | Inlet: BS 336 Instantaneous Male
Related Products
