Single Jacket Hose
The EMACO Single Jacket Hose is a lightweight lay-flat fire hose with one woven jacket, designed for hydrants, standpipes and general water-delivery service at controlled pressures.
- Approval / model options: UL and FM
- Nominal size: 38 mm to 64 mm
- Service pressure: 17 bar
- Burst pressure: 52 bar
- Length: 50 to 100 ft (15 to 30 m)
Engineering overview
The EMACO Single Jacket Hose performs one defined job: it serves as a flexible water-delivery hose for hydrant and standpipe use where light weight and easy handling are priorities. The single polyester jacket protects an EPDM or polyurethane liner while allowing the hose to fold flat for compact storage. EMACO lists models with UL 19 or NFPA 1961 manufacturing references and brass or aluminum coupling options. Match the coupling to the hose valve or hydrant outlet and keep bends, kinks and sharp edges out of the deployment route. Choose diameter, liner, coupling thread and length from the hydraulic demand, outlet connection and handling requirement. A single jacket is suited to normal service where severe abrasion is not expected. The order should identify the offered model, applicable approval, materials, rated pressure or capacity, connection arrangement and accessories. Field installation and acceptance testing follow the design documents and selected product data.
Technical Q&A
How should the EMACO Single Jacket Hose be sized or selected?
Begin with the required flow, pressure, connection and service conditions. Choose diameter, liner, coupling thread and length from the hydraulic demand, outlet connection and handling requirement. A single jacket is suited to normal service where severe abrasion is not expected.
How should the EMACO Single Jacket Hose be arranged in the system?
The system arrangement controls this. Match the coupling to the hose valve or hydrant outlet and keep bends, kinks and sharp edges out of the deployment route.
What should procurement verify for the EMACO Single Jacket Hose?
Confirm the technical schedule before placing the order. Confirm approval, liner material, nominal diameter, service and burst pressure, 15 m or 30 m length, coupling standard and color.
Technical specifications
|
Specification
|
Product information
|
|---|---|
|
Models
|
E0111; E0113; E0112; E0114
|
|
Size / capacity
|
NOMINAL DIAMETER: 1.5’’(40/38mm); 1.5” (38mm); 1.5” (38mm) 1.75’’ (44mm) 2.5’’ (64mm)
|
|
Working pressure
|
Confirm for the selected model.
|
|
Connections
|
Confirm for the selected model.
|
|
Materials / finish
|
LINING MATERIAL: Polyurethane; EPDM
|
|
Documented standards
|
APPROVAL: UL & FM; FM
|
Resources & documents
Access available datasheets and certificates through the protected resources portal. For model-specific submittals, send your project requirements to our technical team.
Model details
MODEL: E0111 | APPROVAL: UL & FM | LINING MATERIAL: Polyurethane | NOMINAL DIAMETER: 1.5’’(40/38mm) | SERVICE PRESSURE, BURST PRESSURE,: 250psi (17bar), 750psi (52bar) | COUPLING: NST/Ghost Coupling
MODEL: E0113 | APPROVAL: FM | LINING MATERIAL: Polyurethane | NOMINAL DIAMETER: 1.5” (38mm) | SERVICE PRESSURE, BURST PRESSURE,: 250psi (17bar), 750psi (52bar) | COUPLING: NST/Ghost Coupling
MODEL: E0112 | APPROVAL: FM | LINING MATERIAL: EPDM | NOMINAL DIAMETER: 1.5” (38mm) | SERVICE PRESSURE, BURST PRESSURE,: 250psi (17bar), 750psi (52bar) | COUPLING: NST/Ghost Coupling
MODEL: E0114 | APPROVAL: FM | LINING MATERIAL: EPDM | NOMINAL DIAMETER: 1.5” (38mm) 1.75’’ (44mm) 2.5’’ (64mm) | SERVICE PRESSURE, BURST PRESSURE,: 250psi (17bar), 750psi (52bar) | COUPLING: NST/Ghost Coupling
Related Products
