Portable Inline Inductor
The EMACO Portable Inline Inductor is a portable fixed-flow eductor that draws foam concentrate into a manual hose stream at a defined inlet pressure and discharge rate.
- FM approved models
- 65 mm instantaneous connections
- Options: 225 and 450 lpm flow
- 7 bar or 12 bar inlet models
- Construction: Bronze or stainless-steel
Engineering overview
Used within a fire-protection system, the EMACO Portable Inline Inductor functions as a hand-line proportioning device for manual foam application at a constant design flow. Select the inductor and branch-pipe pair by required flow, hose arrangement, available inlet pressure and concentrate percentage. Water passing through the inductor creates the pressure reduction needed to draw concentrate into the stream. EMACO lists bronze and stainless-steel models matched to specific branch pipes at 225 or 450 litres per minute. Place the inductor in the hose line with the correct flow direction, suitable concentrate pickup and limited downstream hose length and elevation as specified. Before purchase, lock down the model, approval status, material, rating, connection details and supplied accessories. The installed assembly must follow the approved drawings, product data and governing fire-protection standard.
Technical Q&A
How should the EMACO Portable Inline Inductor be sized or selected?
Begin with the required flow, pressure, connection and service conditions. Select the inductor and branch-pipe pair by required flow, hose arrangement, available inlet pressure and concentrate percentage.
How should the EMACO Portable Inline Inductor be arranged in the system?
The system arrangement controls this. Place the inductor in the hose line with the correct flow direction, suitable concentrate pickup and limited downstream hose length and elevation as specified.
What should procurement verify for the EMACO Portable Inline Inductor?
Confirm the technical schedule before placing the order. Confirm model pair, material, 65 mm coupling, rated inlet pressure, flow, induction percentage, finish and FM approval.
Technical specifications
|
Specification
|
Product information
|
|---|---|
|
Models
|
E0308-7S; E0308-12S; E0308-7S1; E0308-12S1; E0308-7B; E0308-12B; E0308-7B1; E0308-12B1
|
|
Size / capacity
|
SIZE: 2.5’’ (65mm)
|
|
Working pressure
|
Confirm for the selected model.
|
|
Connections
|
INLET PRESSURE: 100 psi (7bar); 175psi (12bar)
|
|
Materials / finish
|
MATERIAL: Stainless Steel; MATERIAL: Bronze
|
|
Documented standards
|
APPROVAL: FM
|
Resources & documents
Access available datasheets and certificates through the protected resources portal. For model-specific submittals, send your project requirements to our technical team.
Model details
MODEL NUMBER: E0308-7S | APPROVAL: FM | MATERIAL: Stainless Steel | SIZE: 2.5’’ (65mm) | INLET PRESSURE: 100 psi (7bar) | FLOW: 225lpm | MATCHING BRANCH PINE: E0309-4.2
MODEL NUMBER: E0308-12S | APPROVAL: FM | MATERIAL: Stainless Steel | SIZE: 2.5’’ (65mm) | INLET PRESSURE: 175psi (12bar) | FLOW: 225lpm | MATCHING BRANCH PINE: E0309-7
MODEL NUMBER: E0308-7S1 | APPROVAL: FM | MATERIAL: Stainless Steel | SIZE: 2.5’’ (65mm) | INLET PRESSURE: 100 psi (7bar) | FLOW: 450lpm | MATCHING BRANCH PINE: E0309-B4.2
MODEL NUMBER: E0308-12S1 | APPROVAL: FM | MATERIAL: Stainless Steel | SIZE: 2.5’’ (65mm) | INLET PRESSURE: 175psi (12bar) | FLOW: 450lpm | MATCHING BRANCH PINE: E0309-B7
MODEL NUMBER: E0308-7B | APPROVAL: FM | MATERIAL: Bronze | SIZE: 2.5’’ (65mm) | INLET PRESSURE: 100 psi (7bar) | FLOW: 225lpm | MATCHING BRANCH PINE: E0309-4.2
MODEL NUMBER: E0308-12B | APPROVAL: FM | MATERIAL: Bronze | SIZE: 2.5’’ (65mm) | INLET PRESSURE: 175psi (12bar) | FLOW: 225lpm | MATCHING BRANCH PINE: E0309-7
MODEL NUMBER: E0308-7B1 | APPROVAL: FM | MATERIAL: Bronze | SIZE: 2.5’’ (65mm) | INLET PRESSURE: 100 psi (7bar) | FLOW: 450lpm | MATCHING BRANCH PINE: E0309-B4.2
MODEL NUMBER: E0308-12B1 | APPROVAL: FM | MATERIAL: Bronze | SIZE: 2.5’’ (65mm) | INLET PRESSURE: 175psi (12bar) | FLOW: 450lpm | MATCHING BRANCH PINE: E0309-B7
Related Products
