Portable Foam Branch Pipe
For fire-protection work, the EMACO Portable Foam Branch Pipe is a hand-held low-expansion foam nozzle matched to portable inductors for manual application on spill fires, loading areas and storage hazards.
- FM approved models
- Options: 225 and 450 lpm flow
- Options: 4.2 bar and 7 bar inlet
- Inlet connection: 65 mm BS instantaneous
- Body material: Lightweight aluminum-alloy body
Engineering overview
The EMACO Portable Foam Branch Pipe performs one defined job: it serves as a manual air-aspirating discharge nozzle that converts proportioned solution into low-expansion finished foam. The branch pipe entrains air as foam solution passes through its body, producing a coherent foam stream for manual placement. EMACO lists 225 and 450 litres-per-minute models matched to its portable inline inductors. Connect to a compatible 65 mm hose and maintain the specified residual pressure. Operators should account for nozzle reaction and wind before application. Select the model as a tested pair with the inductor, based on required flow, operating pressure, throw and available hose-line pressure. The order should identify the offered model, applicable approval, materials, rated pressure or capacity, connection arrangement and accessories. Field installation and acceptance testing follow the design documents and selected product data.
Technical Q&A
What should the design team review before selecting the EMACO Portable Foam Branch Pipe?
Use the approved design criteria as the starting point. Select the model as a tested pair with the inductor, based on required flow, operating pressure, throw and available hose-line pressure.
How does the EMACO Portable Foam Branch Pipe fit into the approved system layout?
The component must match the design route and operating arrangement. Connect to a compatible 65 mm hose and maintain the specified residual pressure. Operators should account for nozzle reaction and wind before application.
What belongs on the approved submittal for the EMACO Portable Foam Branch Pipe?
The submittal must match the final offer. Confirm model, flow, pressure, 65 mm coupling, finish, matching inductor, concentrate type and FM approval.
Technical specifications
|
Specification
|
Product information
|
|---|---|
|
Models
|
E0309-4.2; E0309-7; E0309-B4.2; E0309-B7
|
|
Size / capacity
|
Refer to model documentation.
|
|
Working pressure
|
Confirm for the selected model.
|
|
Connections
|
INLET PRESSURE: 60 psi (4.12bar); 100 psi (7bar); 60 psi (4.2bar); INLET CONNECTION: 2.5” (65mm) BS Male (Instantaneous)
|
|
Materials / finish
|
MATERIAL: Light weight high strength aluminum alloy
|
|
Documented standards
|
APPROVAL: FM
|
Resources & documents
Access available datasheets and certificates through the protected resources portal. For model-specific submittals, send your project requirements to our technical team.
Model details
MODEL: E0309-4.2 | APPROVAL: FM | MATERIAL: Light weight high strength aluminum alloy | INLET PRESSURE: 60 psi (4.12bar) | FLOW IN: 225lpm | INLET CONNECTION: 2.5” (65mm) BS Male (Instantaneous)
MODEL: E0309-7 | APPROVAL: FM | MATERIAL: Light weight high strength aluminum alloy | INLET PRESSURE: 100 psi (7bar) | FLOW IN: 225lpm | INLET CONNECTION: 2.5” (65mm) BS Male (Instantaneous)
MODEL: E0309-B4.2 | APPROVAL: FM | MATERIAL: Light weight high strength aluminum alloy | INLET PRESSURE: 60 psi (4.2bar) | FLOW IN: 450lpm | INLET CONNECTION: 2.5” (65mm) BS Male (Instantaneous)
MODEL: E0309-B7 | APPROVAL: FM | MATERIAL: Light weight high strength aluminum alloy | INLET PRESSURE: 100 psi (7bar) | FLOW IN: 450lpm | INLET CONNECTION:
Related Products
